ASSEMBLY DIAGRAM
1
ROD ASSEMBLY COMPONENTS
1 2 3 4 5
T S
OPTIONAL COMPONENTS
R C D
1 2 3 4 5
Tension Fork Stainless Steel Rod Rod Connector Conical Nut Double Headed Pin
ISOLATION WASHER
ISOLATION SLEEVE
3
2
4
5
1
3
2
TENSION FORK
STAINLESS STEEL ROD
ROD CONNECTOR
ROD COMPONENT SPECIFICATIONS Component
Material
Specification
AISI Type 316, ASTM A480/ A480M4
Tension Fork + Conical Nut, Rod
Type 316 Stainless Steel
Double Headed Pin
Type 316 Stainless Steel
ANSI/ASME B18.6.4
Isolation Washers
Natural Nylon 6
LP-410 A, UL 94 HB flammability
ASTM D6779 PA0114, UL94-V2 flammability
Isolation Sleeves
Glass-loaded Nylon 66
MAINTENANCE GUIDELINES Stainless steel components should be cleaned periodically. Cleaning frequency will depend on the environmental conditions that the product is placed in. Feeney recommends our Stainless Steel Cleaner & Protectant Kit for maintaining stainless steel products. Alternatively, warm water and mild soap can be used. Rinse your rod assemblies with fresh water. Remove dust and dirt with a soft cloth or sponge and a solution of mild soap and/or liquid detergent in water. Always use a soft, damp cloth to blot dry. Avoid harsh solutions or abrasive cleaning compounds, included but not limited to: alkaline or acidic cleaners, solutions containing trisodium phosphate, phosphoric acid, hydroflouric acid, gasoline, benzene, acetone, carbon tetrachloride, certain deicing fluids, lacquer thinner or other strong solvents. Product should be cleaned when the metal is shaded.
See Warranty and Care brochure or scan the QR code to learn more about our product maintenance guidelines and warranty information.
FEENEY IS A PROUD MEMBER OF:
EXECUTIVE BOARD
© 2025 Feeney, Inc. Consistent with our policy of continuing product improvement, we reserve the right to change product specifications without notice or obligation. v2/25
Powered by FlippingBook