ASSEMBLY DIAGRAM
3
ALUMINUM PANEL RAILING COMPONENTS
2
4
Termination Post Top Rail End Plate Top Rail (Series 200 shown) Top Rail Insert Top Vinyl Aluminum Panel Side Channel Side Vinyl Bottom Vinyl Bottom Rail Bracket Bottom Rail
1 2 3 4 5 6 7 8 9
5
6
7
1
8
9
11
10
10 11
ALUMINUM FRAME & FASTENER SPECIFICATIONS
Extrusion Type
Alloy
Specification
Posts, RCBs, Splice Tubes, Fascia Brackets
6005A-T5
ASTM B221
ASTM B221 AMSQQA200/9
Top Rail, Bottom Rail, Intermediate Rail, Snap Cap, Inserts, Pickets
6063-T6
ASTM B221 ASTM B429
Handrail Extrusion
6063-T52
Fastener
Alloy
Specification ANSI/ASME B18.2.1-2012
Lag Screws
Type 18-8 Stainless Steel
Thru-Bolts/Cap Screws
Type 18-8 Stainless Steel
ASTM F593017 CW
Assembly Screws
Type 410 Stainless Steel
ANSI/ASME B18.6.4
LASER-CUT ALUMINUM PANEL SPECIFICATIONS
MAINTENANCE GUIDELINES Laser-Cut Aluminum panels should be cleaned periodically. Cleaning frequency will depend on the environmental conditions that the product is placed in. Feeney recommends warm water and mild soap. Rinse the panels with fresh water. Remove dust and dirt with a soft cloth or sponge and a solution of mild soap and/or liquid detergent in water. Always use a soft, damp cloth to blot dry. Avoid harsh solutions or abrasive cleaning compounds, included but not limited to: alkaline or acidic cleaners, solutions containing trisodium phosphate, phosphoric acid, hydroflouric acid, gasoline, benzene, acetone, carbon tetrachloride, certain deicing fluids, lacquer thinner or other strong solvents. Product should be cleaned when the metal is shaded.
Material
Specification
Aluminum Panel Powder-Coating
5052-T52
AAMA 2604
See Warranty and Care brochure or scan the QR code to learn more about our product maintenance guidelines and warranty information.
FEENEY IS A PROUD MEMBER OF:
EXECUTIVE BOARD
© 2025 Feeney, Inc. Consistent with our policy of continuing product improvement, we reserve the right to change product specifications without notice or obligation. v2/25
Powered by FlippingBook