DesignRail ® Classic Kits Kit Components
Post Cap
POST KITS
Each Classic Post Kit includes a post with a pre-attached base plate, a post cap, and mounting screws with caps. All posts come pre-drilled for the cable fittings or for cables to pass through, and can accommodate isolation bushings when required. Stair posts are pre-drilled at an angle to accommodate a stair slope of between 29 and 34 degrees. Level Post Kits are available for railings in two heights: 36-in with 9 pre-drilled cable holes, or 42-in with 11 pre-drilled cable holes. Stair Post Kits are available for 36-in stair railings only. Isolation bushings are recommended for installations in harsher climates, such as areas near salt water.
Shown: 36-in post
LEVEL POSTS (all posts are predrilled)
Posts are pre-drilled for cables and rails
IN
QC
TT
Caps
QUICK-CONNECT ® END POST KIT Pre-drilled for CableRail Quick-Connect ® end fittings. AVAILABLE 36-in (DR-QC : 7613 BLK-PKG) 36-in (DR-QC : 7613 TBLK-PKG) 42-in (DR-QC : 7618 BLK-PKG) 42-in (DR-QC : 7618 TBLK-PKG)
INTERMEDIATE POST KIT Pre-drilled for cable to pass
THREADED TERMINAL END POST KIT Pre-drilled for CableRail Threaded Terminal end fittings. AVAILABLE 36-in (DR-TT : 7612 BLK-PKG) 36-in (DR-TT : 7612 TBLK-PKG) 42-in (DR-TT : 7617 BLK-PKG) 42-in (DR-TT : 7617 TBLK-PKG) LEVEL
Washers
Mounting Screws
through. AVAILABLE
36-in (DR-IN : 7611 BLK-PKG) 36-in (DR-IN : 7611 TBLK-PKG) 42-in (DR-IN : 7616 BLK-PKG) 42-in (DR-IN : 7616 TBLK-PKG)
DESIGN NOTE: Use Feeney Base Plate Covers (sold separately) for a more finished look.
LEVEL POSTS (cont’d)
LEVEL TO STAIR POSTS (all posts are predrilled)
SC SINGLE CORNER POST KIT Specially designed for use at
NR
NL
NP
NEWEL TERMINATION POST KIT RIGHT Designed for level to stair railing transitions that have a right 90 degree turn from the stairs. Use Quick-Connect ® fitting in level holes and Threaded Terminal fitting in angled holes. AVAILABLE 36-in (DR-NR : 7598 BLK-PKG) 36-in (DR-NR : 7598 TBLK-PKG) 42-in (DR-NR : 7721 BLK-PKG) 42-in (DR-NR : 7721 TBLK-PKG)
NEWEL TERMINATION POST KIT LEFT Designed for level to stair railing transitions that have a left 90 degree turn from the stairs. Use Quick-Connect ® fitting in level holes and Threaded Terminal fitting in angled holes. AVAILABLE 36-in (DR-NL : 7599 BLK-PKG) 36-in (DR-NL : 7599 TBLK-PKG) 42-in (DR-NL : 7722 BLK-PKG) 42-in (DR-NL : 7722 TBLK-PKG)
NEWEL PASSTHROUGH POST KIT Designed for level to stair railing transitions where cables continue through. AVAILABLE 36-in (DR-NP : 7600 BLK-PKG) 36-in (DR-NP : 7600 TBLK-PKG) 42-in (DR-NP : 7723 BLK-PKG) 42-in (DR-NP : 7723 TBLK-PKG)
corners. Pre-drilled for CableRail to run continuously through the post. AVAILABLE 36-in (DR-SC : 7624 BLK-PKG) 36-in (DR-SC : 7624 TBLK-PKG) 42-in (DR-SC : 7720 BLK-PKG) 42-in (DR-SC : 7720 TBLK-PKG)
Powered by FlippingBook