Feeney Sales Binder 2024

Welcome to the new Feeney sales binder, built with the sales representative in mind. Whether you are a contractor, dealer or rep selling Feeney, this book is built for you!

CableRail FOR WOOD FRAME FOR METAL FRAME FOR COMPOSITE FRAME

v2/25

CableRail CableRail Kits WOOD FRAME

MORE INFO

LONG TERMINAL

All fittings and cables are manufactured from high-quality 316-grade stainless steel for weather-tough durability, ultra-low maintenance, and lasting beauty.

Our Standard CableRail Kits are the most popular and cost- effective solution for wood railing frames and include everything needed to attach and tension a cable. They’re designed for frames where there is access to drill through both end posts allowing the fittings to anchor to the outer faces of the posts.

Long Terminal Kits for Wood 7½-in Threaded Terminal

Long Terminal Kits Our original CableRail system is an easy- to-install option for almost every project. It is packaged and ready to go in preset lengths and can be trimmed as needed in the field. Each kit includes:

Quick-Connect ® Inset Fitting

Selected length of 1⁄8 -in diameter cable with Threaded Terminal pre-attached to one end

Pair of flat washers (Stainless for wood posts)

Snug-Grip ® Washer Nut

Level Railing Frame Options Ordering Information:

NEW FOR 2025

CABLERAIL KITS - LONG TERMINAL (1/8”) FOR WOOD POSTS Choose the increment based on your cable run length. Kits are available in bulk for large projects; ask your retailer for more information.

NEW FOR 2025: BLACK OXIDE* CABLERAIL KITS CableRail Standard 1/8" Kits, with Black Oxide coating on cables and Threaded Terminals (Black Oxide end caps sold separately) . SPECIAL ORDER

LEVEL KITS

LONG TERMINAL KITS (1/8") ITEM#

LENGTH

CR 1/8 : SS-L-05-PKG (6305-PKG) CR 1/8 : OX-L-05-PKG *

CR 1/8 : SS-L-30-PKG (6330-PKG) CR 1/8 : OX-L-30-PKG * CR 1/8 : SS-L-35-PKG (6335-PKG) CR 1/8 : OX-L-35-PKG * CR 1/8 : SS-L-40-PKG (6340-PKG) CR 1/8 : OX-L-40-PKG * CR 1/8 : SS-L-45-PKG (6345-PKG) CR 1/8 : OX-L-45-PKG * CR 1/8 : SS-L-50-PKG (6350-PKG) CR 1/8 : OX-L-50-PKG *

5-ft

30-ft

Recommended Corner Options

10-ft CR 1/8 : SS-L-10-PKG (6310-PKG) CR 1/8 : OX-L-10-PKG * 15-ft CR 1/8 : SS-L-15-PKG (6315-PKG) CR 1/8 : OX-L-15-PKG * 20-ft CR 1/8 : SS-L-20-PKG (6320-PKG) CR 1/8 : OX-L-20-PKG * 25-ft CR 1/8 : SS-L-25-PKG (6325-PKG) CR 1/8 : OX-L-25-PKG *

35-ft

TERMINATING

40-ft

45-ft

Double Corner

50-ft

All level kits can be used for stair applications using beveled washers.

Single Corner*

*If you choose to have cables terminating at a single wood post offset drill holes at least 1⁄2 -in.

LEVEL CONFIGURATION

THREADED TERMINAL

QUICK-CONNECT ® INSET W/ PROTECTOR SLEEVE

CONTINUOUS

* Coating durability dependent on application, care, and maintenance. Not recommended for harsh environments.

Kit Components

Features Quick-Connect ® one-way locking jaws that allow the cable to easily slide through the fitting in one direction but automatically grab and lock-on after the cable is released. Just slip it on, pull the cable tight, tension, cut off the excess, and finish with a decorative End Cap (sold separately) . QUICK-CONNECT ® INSET FITTING

OUTSIDE INSIDE

THREADED TERMINAL Comes fastened to one end of the cable and attaches to an end post using a special Snug-Grip ® Washer Nut. Simply spin the nut to adjust the final tension in the cable line and finish with a decorative End Cap (sold separately) .

INSIDE OUTSIDE

PLEASE NOTE: FEENEY DOES NOT PROVIDE WOOD FRAME.

Don’t Forget Your Pickets and End Caps!

Stair Railing Frame Options

STAIR KIT

LENGTH

CABLERAIL STAIR KIT (1/8") FOR WOOD POSTS

MAKE INSTALLATION EASIER—USE OUR FEENEY ENGINEERED TOOLS. 1 Quick-Connect ® Release Tool: For releasing the Quick-Connect ® jaws to remove or adjust fitting. 2 Cable Lacing Needle: For quickly lacing cable ends through posts without snagging. 3 Cable Tensioning Tool: For quick and easy tensioning of cables.

20-ft

#6520-PKG

STAIR CONFIGURATIONS

CABELRAIL KITS FOR STAIRS

CABELRAIL KITS FOR LEVEL

4 Cable Tensioning Gauge: An easy-to-use tool for checking cable tension. 5 Cable Cutters : For shearing stainless steel cables.

CABELRAIL KITS FOR LEVEL WITH BEVELED WASHER

CABELRAIL KITS RUNS WITH LEVEL AND STAIR

Visit our website for technical specifications: feeneyinc.com/technical-information

CableRail Conceal Kits are an easy-to-install cable railing system which provide an alternative solution to our original CableRail Kits for customers looking for the look and feel of a slightly lower profile of the fittings on the end posts. CableRail CableRail Conceal Kits WOOD FRAME

MORE INFO:

All fittings and cables are manufactured from high-quality 316-grade stainless steel for weather-tough durability, ultra-low maintenance, and lasting beauty.

Conceal Kits for Wood Posts (100 series) have a CR Conceal Terminal pre-attached.

Low Profile Kits for Wood Posts A low-profile CableRail option with slender end caps and special compact cable fittings that hide inside the end posts for a completely symmetrical look. Each kit includes:

1⁄8 -in diameter cable with Conceal Terminal pre-attached to one end

Conceal Quick- Connect ® Fitting

Conceal Receiver

Level Railing Frame Options

Recommended Corner Options

CONCEAL KITS (1/8") FOR WOOD POSTS Available in 5-ft increments starting at 5-ft all the way up to 50-ft. Choose the increment based on your cable run length. These items are available in bulk for large projects; ask your retailer for more information. Ordering Information:

TERMINATING

LENGTH

100 SERIES (1/8")

LENGTH

100 SERIES (1/8")

Double Corner

5-ft

CRC 1/8 : 105

30-ft

CRC 1/8 : 130

10-ft

CRC 1/8 : 110

35-ft

CRC 1/8 : 135

Single Corner*

15-ft

CRC 1/8 : 115

40-ft

CRC 1/8 : 140

*If you choose to have cables terminating at a single wood post offset drill holes at least 1⁄2 -in.

20-ft

CRC 1/8 : 120

45-ft

CRC 1/8 : 145

CONTINUOUS

25-ft

CRC 1/8 : 125

50-ft

CRC 1/8 : 150

All level kits can be used for stair applications using beveled washers.

LEVEL CONFIGURATION

CONCEAL QUICK-CONNECT ®

CONCEAL RECEIVER

Conceal Kit Components

CONCEAL QUICK-CONNECT ® FITTING Based on the same easy to install technology as our original Quick- Connect ® fitting but with a lower profile on the post surface and a snap in Conceal Cap that’s available in stainless steel and gray plastic (sold separately) .

OUTSIDE INSIDE

CONCEAL RECEIVER Tension adjustment fitting that connects to the Conceal terminal. Use the Conceal Tool Kit to adjust the tension on the cables. Complete the look with a snap in Conceal cap (sold separately) .

INSIDE OUTSIDE

Don’t Forget Your Pickets and End Caps!

PLEASE NOTE: FEENEY DOES NOT PROVIDE WOOD FRAME.

Stair Railing Frame Options

All level kits can be used for stair applications using beveled washers.

1 Conceal Tool Kit: Specifically designed tools to install your Conceal Kit fittings. 2 Conceal Cap Removal Tool: For removing a Conceal Cap. 3 Cable Lacing Needle: For quickly lacing cable ends through posts without snagging. 4 Cable Tensioning Gauge: An easy-to-use tool for checking cable tension. 5 Cable Cutters : For shearing stainless steel cables. MAKE INSTALLATION EASIER—USE OUR FEENEY ENGINEERED TOOLS.

STAIR CONFIGURATION

CONCEAL QUICK-CONNECT ® W/ BEVELED WASHER

CONCEAL RECEIVER W/ BEVELED WASHER

Design your dream railing in 3D!

Visit our website at feeneyinc.com for more information, a searchable gallery of inspiration with hundreds of photos, and other design resources.

feeneyinc.com/visual-builder

CableRail Fittings+Cable WOOD FRAME

MORE INFO:

All fittings and cables are manufactured from high-quality 316-grade stainless steel for weather-tough durability, ultra-low maintenance, and lasting beauty.

You can also build your own assemblies to fit your needs using cable and special CableRail Quick-Connect ® fittings. Each assembly must have at least one Tension Adjustment Fitting.

Railing Frame Options Ordering Information:

LEVEL CONFIGURATIONS

BULK CABLE OPTIONS

QC LAG TENSIONER

Bulk CableRail 1/8" diameter, grade-316 stainless steel cable is available in various lengths for use with CableRail fittings.

QC LAG

LENGTH

ITEM #

100-ft

5100

QC SURFACE MOUNT

QC SURFACE MOUNT TENSIONER

250-ft 500-ft

5250

5500

Recommended Corner Options TERMINATING

STAIR CONFIGURATIONS

QC PIVOT

QC PIVOT TENSIONER

CONTINUOUS Single Corner

Double Corner

QC SURFACE MOUNT

QC SURFACE MOUNT TENSIONER

Double Corner

Assembly Components

QUICK-CONNECT ® LAG TENSIONER

Tension adjustment fitting with a special swiveling body that allows 3/4-in of take up for cable tensioning.

OUTSIDE INSIDE

QUICK-CONNECT ® LAG Fixed end fitting that screws into the face of a post or wall using the included hanger bolt with lag thread.

INSIDE OUTSIDE

PLEASE NOTE: FEENEY DOES NOT PROVIDE WOOD FRAME.

Don’t Forget Your Pickets!

FITTING OPTIONS

QUICK-CONNECT ® LAG TENSIONER 9910DL-PKG

QUICK-CONNECT ® LAG 9905DL-PKG

MAKE INSTALLATION EASIER—USE OUR FEENEY ENGINEERED TOOLS. 1 Quick-Connect ® Release Tool: For releasing the Quick-Connect ® jaws to remove or adjust fitting. 2 Wrench Wheel: An easy-to-use tool for tensioning Quick-Connect ® Tensioner fittings. 3 Cable Lacing Needle: For quickly lacing cable ends through posts without snagging. 4 Cable Tensioning Gauge: An easy-to-use tool for checking cable tension. 5 Cable Cutters : For shearing stainless steel cables.

Fixed end fitting that screws into the face of a post or wall using the included hanger bolt with lag thread. Includes 2-in bolt for wood posts and 2 ½-in bolt for wrapped or composite-sleeved wood posts.

Tension adjustment fitting with a special swiveling body that allows 3/4-in of take up for cable tensioning. Includes same hanger bolts as Lag fitting.

QUICK-CONNECT ® PIVOT TENSIONER 9916DL-PKG

QUICK-CONNECT ® PIVOT 9915DL-PKG

Fixed end fitting that screws into the face of a post or wall using the included hanger bolt with lag thread. 180º pivot range allows for angled stair terminations. Includes 2-in bolt for wood posts and 2 ½-in bolt for wrapped or composite-sleeved wood posts.

Tension adjustment fitting with a special swiveling body that allows ³/ 4-in of take up for cable tensioning. Includes same hanger bolts as Pivot fitting.

QUICK-CONNECT ® SURFACE MOUNT 9903W-PKG

QUICK-CONNECT ® SURFACE MOUNT TENSIONER 9913W-PKG Tension adjustment fitting with a special swiveling body that allows 3/4-in of take up for cable tensioning. Includes same hanger bolts as Surface Mount fitting.

Fixed end fitting that attaches to the face of a post or wall with the included screws or bolts. 130° pivot range allows for angled stair terminations. Includes 2-in lag screws for wood posts

Visit our website to see all available fittings:

feeneyinc.com/product/cable-railing

CableRail CableRail Kits METAL FRAME

MORE INFO:

SHORT TERMINAL

All fittings and cables are manufactured from high-quality 316-grade stainless steel for weather-tough durability, ultra-low maintenance, and lasting beauty.

Our Standard CableRail Kits are the most popular and cost-effective solution for custom fabricated metal railing frames, and include everything needed to attach and tension a cable. They’re designed for frames where there is access to drill through both end posts, allowing the fittings to anchor to the outer faces of the posts.

Short Terminal Kits for Metal 4½-in Threaded Terminal

Short Terminal Kits Our original CableRail system is an easy- to-install option for almost every project. It’s packaged and ready to go in preset lengths and can be trimmed as needed in the field. Each kit includes:

Quick-Connect ® Inset Fitting

Selected length of 1/8-in diameter cable with Threaded Terminal pre-attached to one end

Pair of flat washers (Nylon for metal posts)

Snug-Grip ® Washer Nut

Level Railing Frame Options

For a complete railing solution, visit feeneyinc.com/product/aluminum-railing/

Ordering Information:

LEVEL CONFIGURATION

CABLERAIL KITS - SHORT TERMINAL (1/8") FOR METAL POSTS Choose the increment based on your cable run length. Kits are available in bulk for large projects; ask your retailer for more information.

QUICK- CONNECT ® INSET

THREADED TERMINAL

SHORT TERMINAL KITS (1/8") ITEM#

LENGTH

NEW FOR 2025

CR 1/8 : SS-S-05-PKG (6205-PKG) CR 1/8 : OX-S-05-PKG * CR 1/8 : SS-S-10-PKG (6210-PKG) CR 1/8 : OX-S-10-PKG * CR 1/8 : SS-S-15-PKG (6215-PKG) CR 1/8 : OX-S-15-PKG * CR 1/8 : SS-S-20-PKG (6220-PKG) CR 1/8 : OX-S-20-PKG * CR 1/8 : SS-S-25-PKG (6225-PKG) CR 1/8 : OX-S-25-PKG *

CR 1/8 : SS-S-30-PKG (6230-PKG) CR 1/8 : OX-S-30-PKG * CR 1/8 : SS-S-35-PKG (6235-PKG) CR 1/8 : OX-S-35-PKG * CR 1/8 : SS-S-40-PKG (6240-PKG) CR 1/8 : OX-S-40-PKG * CR 1/8 : SS-S-45-PKG (6245-PKG) CR 1/8 : OX-S-45-PKG * CR 1/8 : SS-S-50-PKG (6250-PKG) CR 1/8 : OX-S-50-PKG *

30-ft

5-ft

35-ft

10-ft

15-ft

40-ft

20-ft

45-ft

NEW FOR 2025: BLACK OXIDE* CABLERAIL KITS CableRail Standard 1/8" Kits, with Black Oxide coating on cables and Threaded Terminals (Black Oxide end caps sold separately) . SPECIAL ORDER

50-ft

25-ft

All kits can be used for stair applications using beveled washers.

SINGLE PIPE*

DOUBLE PIPE

ANGLE IRON

DOUBLE FLAT BAR

Recommended Corner Options

(for custom metal frames)

*Offset drill holes at least 1/2-in if you choose to have cables terminating at a single pipe post.

* Coating durability dependent on application, care, and maintenance. Not recommended for harsh environments.

Kit Components

QUICK-CONNECT ® INSET FITTING Features Quick-Connect ® one-way locking jaws that allow the cable to easily slide through the fitting in one direction but automatically grab and lock-on after the cable is released. Just slip it on, pull the cable tight, tension, cut off the excess, and finish with a decorative End Cap (sold separately) .

OUTSIDE INSIDE

THREADED TERMINAL Comes fastened to one end of the cable and attaches to an end post using a special Snug- Grip ® Washer Nut. Simply spin the nut to adjust the final tension in the cable line and finish with a decorative End Cap (sold separately) .

INSIDE OUTSIDE

DESIGNRAIL® PICTURED ABOVE. CABLERAIL KITS ALSO WORK WITH CUSTOM FABRICATED FRAMES

Don’t Forget Your Pickets and End Caps!

For a complete railing solution, visit feeneyinc.com/product/aluminum-railing/

Stair Railing Frame Options

All kits can be used for stair applications using beveled washers.

STAIR CONFIGURATIONS

QUICK- CONNECT ®

THREADED TERMINAL W/ BEVELED WASHERS

QUICK-CONNECT ® W/ BEVELED WASHER

THREADED TERMINAL W/ BEVELED WASHERS

4 Cable Tensioning Gauge: An easy-to-use tool for checking cable tension. 5 Cable Cutters : For shearing stainless steel cables.

Design your dream railing in 3D! feeneyinc.com/visual-builder

Visit our website at feeneyinc.com for more information, a searchable gallery of inspiration with hundreds of photos, and other design resources.

CableRail Fittings+Cable METAL FRAME

MORE INFO:

All fittings and cables are manufactured from high-quality 316-grade stainless steel for weather-tough durability, ultra-low maintenance, and lasting beauty.

Build your own assemblies to fit custom metal frames using cable and special CableRail Quick-Connect ® fittings. Each assembly must have at least one Tension Adjustment Fitting.

Railing Frame Options Ordering Information: BULK CABLE OPTIONS

Bulk CableRail 1/8" diameter, grade-316 stainless steel cable is available in various lengths for use with CableRail fittings.

LENGTH

ITEM #

Feeney has a wide variety of custom fittings for 1/8", 3/16 " and 1/4" diameter cables. For more information, visit our website at feeneyinc.com

100-ft

5100

250-ft

5250

500-ft

5500

Recommended Corner Options

SINGLE PIPE*

DOUBLE PIPE

SQUARE

DOUBLE SQUARE

(for custom metal frames)

*Offset drill holes at least 1/2" if you choose to have cables terminating at a single pipe post.

Assembly Components

QUICK-CONNECT ® SURFACE MOUNT TENSIONER

Tension adjustment fitting with a special swiveling body that allows 3/4-in of take up for cable tensioning.

OUTSIDE INSIDE

QUICK-CONNECT ® SURFACE MOUNT

Fixed end fitting that attaches to the face of a post or wall. 130° pivot range allows for angled stair terminations. (1/2-in bolts for metal posts sold separately).

INSIDE OUTSIDE

Don’t Forget Your Pickets!

PLEASE NOTE: FEENEY DOES NOT PROVIDE METAL FRAME

FITTING OPTIONS

QUICK-CONNECT ® SURFACE MOUNT TENSIONER 9913W-PKG Surface Mount fitting with a special swiveling body that allows 3/4" of take up for cable tensioning. Includes same lag screws as Surface Mount.

QUICK-CONNECT ® SURFACE MOUNT 9903W-PKG

Fixed end fitting that attaches to the face of a post or wall with the included screws or bolts. 130° pivot range allows for angled stair terminations. Includes 2" lag screws for wood posts (½-in bolts for metal posts sold separately).

MAKE INSTALLATION EASIER — USE OUR FEENEY ENGINEERED TOOLS.* 1 Quick-Connect ® Release Tool: For releasing the Quick-Connect ® jaws to remove or adjust fitting. 2 Wrench Wheel: An easy-to-use tool for tensioning Quick-Connect ® Tensioner fittings. 3 Cable Lacing Needle: For quickly lacing cable ends through posts without snagging. 4 Cable Tensioning Gauge: An easy-to-use tool for checking cable tension. 5 Cable Cutters : For shearing stainless steel cables.

LEVEL CONFIGURATIONS

QC SURFACE MOUNT TENSIONER

QC SURFACE MOUNT

STAIR CONFIGURATIONS

QC SURFACE MOUNT

QC SURFACE MOUNT TENSIONER

*See page 31 for more details and ordering information.

Visit our website to for technical documents and other resources: feeneyinc.com

CableRail Fittings+Cable COMPOSITE FRAME

MORE INFO:

All fittings and cables are manufactured from high-quality 316-grade stainless steel for weather-tough durability, ultra-low maintenance, and lasting beauty.

Build your own assemblies to fit composite- wrapped wood posts using cable and special CableRail Quick-Connect ® fittings. Each assembly must have at least one Tension Adjustment Fitting.

Railing Frame Options Ordering Information:

LEVEL CONFIGURATIONS

Bulk CableRail 1/8" diameter, grade-316 stainless steel cable is available in various lengths for use with CableRail fittings. BULK CABLE OPTIONS

QC LAG TENSIONER

QC LAG

LENGTH

ITEM #

100-ft

5100

250-ft

5250

500-ft

5500

Recommended Corner Options TERMINATING

STAIR CONFIGURATIONS

QC PIVOT

Single Corner

Double Corner

QC PIVOT TENSIONER

CONTINUOUS

Double Corner

Assembly Components

QUICK-CONNECT ® LAG TENSIONER Tension adjustment fitting with a special swiveling body that allows ³/ 4 -in of take up for cable tensioning.

OUTSIDE INSIDE

QUICK-CONNECT ® LAG Fixed end fitting that screws into the face of a post or wall using the included hanger bolt with lag thread.

INSIDE OUTSIDE

PLEASE NOTE: FEENEY DOES NOT PROVIDE COMPOSITE FRAME.

Don’t Forget Your Pickets!

FITTING OPTIONS

QUICK-CONNECT ® LAG TENSIONER 9910DL-PKG

QUICK-CONNECT ® LAG 9905DL-PKG

Tension adjustment fitting with a special swiveling body that allows 3/4-in of take up for cable tensioning. Includes same hanger bolts as Lag.

QUICK-CONNECT ® PIVOT TENSIONER 9916DL-PKG

QUICK-CONNECT ® PIVOT 9915DL-PKG Fixed end fitting that screws into the face of a post or wall using the included hanger bolt with lag thread. 180º pivot range allows for angled stair terminations. Includes 2-in bolt for wood posts and 2 ½-in bolt for wrapped or composite- sleeved wood posts.

Tension adjustment fitting with a special swiveling body that allows 3/4-in of take up for cable tensioning. Includes same hanger bolts as Pivot.

4 Cable Tensioning Gauge: An easy-to-use tool for checking cable tension. 5 Cable Cutters : For shearing stainless steel cables.

Design your dream railing in 3D!

Visit our website at feeneyinc.com for more information, a searchable gallery of inspiration with hundreds of photos, and other design resources.

feeneyinc.com/visual-builder

CableRail Order Checklist Make your railing view friendly with the original stainless steel cable infill for wood, metal, and composite railing. Once again Feeney is making it easy for you to under - stand, find and purchase the original cable railing products. Step 1 : Take this brochure with the option that you like to your contractor or retailer. Step 2 : Tear this page out and hand to your contractor or retailer to start the estimating process.

Total LF of Railing needed

Height of Railing: 36" or 42"

Bottom Rail 36" (9 Cable Rows) 42" (11 Cable Rows)

No Bottom Rail 36" (11 Cable Rows) 42" (13 Cable Rows)

Wood

Tools

CORNER CONFIGURATION

Double Posts

Single Posts

SOLUTION A

Cable Cutters 2972-PKG Stainless Cleaner Kit 5064-PKG Wrench Wheel 6006-PKG Cable Tensioning Tool 6005-PKG Tension Gauge 6004-PKG Multi-Tool MT-1/8

Quick-Connect ® Release Tool 3128-PKG Cable Lacing Needle 3221-PKG Hanger Bolt Installation Tool 3988-PKG Conceal Cap Remover CCRT Conceal Tool Kit CRC-KIT Conceal Star Driver CSDT

CableRail Kits - Long

1/8" Black Oxide * SPECIAL ORDER

1/8" Stainless Steel

Terminal:

10' 35'

15' 40'

20' 45'

25' 50'

30'

* Coating durability dependent on application, care, and maintenance. Not recommended for harsh environments.

SOLUTION B

SPECIAL ORDER

Conceal CableRail Kits: 1/8" only 5' 10' 15'

20' 45'

25' 50'

30'

35'

40'

Additional Components

SOLUTION C

Fittings + Cable (1/8" cable) 9903 - Surface Mount

9905 - Lag

9915 - Pivot

Level - Silver 7648 SLV-PKG Level - Black 7648 BLK-PKG Level - White 7648 WHT-PKG PICKETS - ALUMINUM PICKETS - STAINLESS Level - 36" SSPK 36L-PKG Level - 42" SSPK 42L-PKG Stair SSPK STR-PKG END CAPS - STAINLESS Dome 3372-PKG - 4 pack Crown 3373-PKG - 4 pack Chamfer 3374-PKG - 4 pack

9913 - Surface Mount

9910 - Lag Tensioner

9916 - Pivot Tensioner

Stair - Silver 7649 SLV-PKG Stair - Black 7649 BLK-PKG Stair - White 7649 WHT-PKG

Tensioner

OPTIONAL ALUMINUM RAIL KITS Level - 36" 7724 Black

Textured Black Stair - 36" 7610

Level - 42" 7609

NOTE: Kits and fittings are available for other cable diameters via special order

CONCEAL

Metal

Conceal End Cap - Stainless CCP Conceal End Cap - Plastic CCP : PL Gray Conceal Flat Washer CWW Conceal Beveled Washer CBW

SOLUTION A

CableRail Kits - Short

1/8" Black Oxide * SPECIAL ORDER

1/8" Stainless Steel

Terminal:

END CAPS - POLYETHYLENE Black 7071-PKG - 10 Pack White 7072-PKG - 10 Pack Brown 7073-PKG - 10 Pack Gray 7074-PKG - 10 Pack Bronze 7077-PKG - 10 Pack

10' 35'

15' 40'

20' 45'

25' 50'

30'

SOLUTION B

* Coating durability dependent on application, care, and maintenance. Not recommended for harsh environments.

Fittings + Cable (1/8" cable) 9903 - Surface Mount

WASHERS

NOTE: Kits and fittings are available for other cable diameters via special order

9913 - Surface Mount Tensioner

Beveled Washers - QC 3792-PKG - 4 Pack Beveled Washers - TT 3799-PKG - 4 Pack Beveled Washers - IN PBW - Each

SOLUTION C Use our DesignRail ® Classic Kit Order Guide , DesignRail ® Modern Kit Order Guide or our DesignRail ® Custom RFQ for more options. Composite Double Posts Single Posts CORNER CONFIGURATION

PROTECTOR SLEEVES

For Wood & Composite 3210-PKG - 10 pack

This checklist is to be used with your contractor or retailer to begin the estimating process. Find a Feeney retailer online at feeneyinc.com/dealer-locator . To find a Feeney contractor, go to feeneyinc.com/installer-locator .

SOLUTION A

NOTE: Kits and fittings are available for other cable diameters via special order

Fittings + Cable (1/8" cable) 9905 - Lag

Feeney is always here to help! You can call us at (800) 888- 2418 or you may email us at sales@feeneyinc.com .

9915 - Pivot

9910 - Lag Tensioner

9916 - Pivot Tensioner

* Coating durability dependent on application, care, and maintenance. Not recommended for harsh environments.

Railing Design Tips for CableRail

SELECT YOUR CORNER TYPE Double corner posts (recommended for wood and metal posts only) allow cables to either run continuously through a corner, requiring fewer fittings, or to easily terminate. SELECT YOUR POST MATERIAL CableRail infill works on railing frames with wood, metal, or composite-sleeved wood posts in either indoor or outdoor settings. WOOD METAL COMPOSITE

Single corner posts (recommended for composite-sleeved wood posts) are also an option and typically require the cables to terminate at the corner. (To use a single corner with CableRail Kits, one run will be offset by 1/2").

SELECT YOUR PICKET TYPE Slender intermediate pickets may be used instead of some bulkier intermediate posts to achieve a more open railing design while maintaining proper cable spacing. (For picket options see Page 30)

DESIGN TOP AND BOTTOM RAIL Always include a strong, rigid, securely fastened top rail to provide necessary strength to the frame and help support the cable tension loads. Underneath the top rail, attach a minimum 1" x 4" wood blocking between posts to provide additional lateral reinforcement to the posts. Bottom rails (optional) add rigidity to railing and can be an attractive and functional foot- rest addition to railing designs.

Aluminum (square)

(see website for additional options)

Stainless Steel * (tubular)

SKETCH YOUR LAYOUT

* SS Pickets for WOOD FRAMES ONLY

Visit feeneyinc.com/technical-information for installation instructions.

Design your dream railing in 3D! feeneyinc.com/visual-builder

CableRail Product List - CableRail Kits

Item Name/Description

Unit Item #

Case Item#

Qty/Unit

Qty/Case

1/8" CableRail Long Terminal Kits

Stainless Steel

Black Oxide

Stainless Steel only

1/8" X 5 ft CableRail Kit, Long Terminal

CR 1/8 : SS-L-05-PKG (6305-PKG)

CR 1/8 : OX-L-05-PKG 1/pack CR 1/8 : SS-L-05-CS 24 packs

1/8" X 10 ft CableRail Kit, Long Terminal

CR 1/8 : SS-L-10-PKG (6310-PKG)

CR 1/8 : OX-L-10-PKG 1/pack CR 1/8 : SS-L-10-CS 24 packs

1/8" X 15 ft CableRail Kit, Long Terminal

CR 1/8 : SS-L-15-PKG (6315-PKG)

CR 1/8 : OX-L-15-PKG 1/pack CR 1/8 : SS-L-15-CS 24 packs

1/8" X 20 ft CableRail Kit, Long Terminal

CR 1/8 : SS-L-20-PKG (6320-PKG)

CR 1/8 : OX-L-20-PKG 1/pack CR 1/8 : SS-L-20-CS 24 packs

1/8" X 25 ft CableRail Kit, Long Terminal

CR 1/8 : SS-L-25-PKG (6325-PKG)

CR 1/8 : OX-L-25-PKG 1/pack CR 1/8 : SS-L-25-CS 12 packs

1/8" X 30 ft CableRail Kit, Long Terminal

CR 1/8 : SS-L-30-PKG (6330-PKG)

CR 1/8 : OX-L-30-PKG 1/pack CR 1/8 : SS-L-30-CS 12 packs

1/8" X 40 ft CableRail Kit, Long Terminal

CR 1/8 : SS-L-40-PKG (6340-PKG)

CR 1/8 : OX-L-40-PKG 1/pack CR 1/8 : SS-L-40-CS 12 packs

1/8" X 50 ft CableRail Kit, Long Terminal

CR 1/8 : SS-L-50-PKG (6350-PKG)

CR 1/8 : OX-L-50-PKG 1/pack CR 1/8 : SS-L-50-CS 12 packs

CableRail Stair Kit, Wood 1/8” X 20 ft

6520-PKG

N/A

1/pack CR 1/8 : SS-L-20-CS 24 packs

1/8" CableRail Short Terminal Kits 1/8" X 5 ft CableRail Kit, Short Terminal

Stainless Steel

Black Oxide

Stainless Steel only

CR 1/8 : SS-S-05-PKG (6205-PKG)

CR 1/8 : OX-S-05-PKG 1/pack CR 1/8 : SS-S-05-CS 24 packs

1/8" X 10 ft CableRail Kit, Short Terminal

CR 1/8 : SS-S-10-PKG (6210-PKG)

CR 1/8 : OX-S-10-PKG 1/pack CR 1/8 : SS-S-10-CS 24 packs

1/8" X 15 ft CableRail Kit, Short Terminal

CR 1/8 : SS-S-15-PKG (6215-PKG)

CR 1/8 : OX-S-15-PKG 1/pack CR 1/8 : SS-S-15-CS 24 packs

1/8" X 20 ft CableRail Kit, Short Terminal

CR 1/8 : SS-S-20-PKG (6220-PKG)

CR 1/8 : OX-S-20-PKG 1/pack CR 1/8 : SS-S-20-CS 24 packs

1/8" X 25 ft CableRail Kit, Short Terminal

CR 1/8 : SS-S-25-PKG (6225-PKG)

CR 1/8 : OX-S-25-PKG 1/pack CR 1/8 : SS-S-25-CS 12 packs

1/8" X 30 ft CableRail Kit, Short Terminal

CR 1/8 : SS-S-30-PKG (6230-PKG)

CR 1/8 : OX-S-30-PKG 1/pack CR 1/8 : SS-S-30-CS 12 packs

1/8" X 40 ft CableRail Kit, Short Terminal

CR 1/8 : SS-S-40-PKG (6240-PKG)

CR 1/8 : OX-S-40-PKG 1/pack CR 1/8 : SS-S-40-CS 12 packs

1/8" X 50 ft CableRail Kit, Short Terminal

CR 1/8 : SS-S-50-PKG (6250-PKG)

CR 1/8 : OX-S-50-PKG 1/pack CR 1/8 : SS-S-50-CS 12 packs

Stainless Steel

Black Oxide

Steel End Caps (Short/Long Term. Kits ONLY) End Cap Dome, Stainless Steel or Black Oxide

SS only

SSEC : 3372-PKG

4/pack

3372-CS

24/pkgs

End Cap Crown, Stainless Steel or Black Oxide

SSEC : 3373-PKG

4/pack

3373-CS

24/pkgs

End Cap Chamfer, Stainless Steel or Black Oxide

SSEC : 3374-PKG

SSEC : 3374-OX

4/pack

3374-CS

24/pkgs

Polyethylene End Caps (Short/Long Term. Kit ONLY)

Unit Item #

Item Qty

Case Item #

Case Qty

End Cap Black (polyethylene)

CEC : 7071-PKG

10/pack

7071-CS

24 packs

End Cap White (polyethylene)

CEC : 7072-PKG

10/pack

7072-CS

24 packs

End Cap Brown (polyethylene)

CEC : 7073-PKG

10/pack

7073-CS

24 packs

End Cap Gray (polyethylene)

CEC : 7074-PKG

10/pack

7074-CS

24 packs

End Cap Bronze (polyethylene)

CEC : 7077-PKG

10/pack

7077-CS

24 packs

Stainless Steel

Black Oxide

Additional Components (Short/Long Term. Kits ONLY)

SS only

Washer Beveled SS (3/8 X 3/4 O.D.) for 1/8” QC

BW: 3792-PKG

BW : 3792-OX

4/pack

3792-CS

24 packs

Washer Beveled SS (9/32 X 3/4 O.D.) for Terminal

BW: 3799-PKG

BW : 3799-OX

4/pack

3799-CS

24 packs

Tools for Standard Kits ONLY Tensioning Tool w/ 1/8" Attachment

Unit Item #

Item Qty

Case Item #

Case Qty

6005-PKG

1/pack

6005-CS

4 packs

* Coating durability dependent on application, care, and maintenance. Not recommended for harsh environments.

For additional tools and components, including Intermediate Pickets and cleaner, see page 18

CableRail Product List - Conceal Kits

Item Name/Description

Unit Item #

Case Item#

Qty/Unit

Qty/Case

1/8" CableRail Conceal Kits ** special order 1/8" X 5 ft CableRail Conceal Kit**

CRC 1/8 : 105-PKG

1/pack

CRC 1/8 : 105-CS

24 packs

1/8" X 10 ft CableRail Conceal Kit**

CRC 1/8 : 110-PKG

1/pack

CRC 1/8 : 110-CS

24 packs

1/8" X 15 ft CableRail Conceal Kit**

CRC 1/8 : 115-PKG

1/pack

CRC 1/8 : 115-CS

24 packs

1/8" X 20 ft CableRail Conceal Kit**

CRC 1/8 : 120-PKG

1/pack

CRC 1/8 : 120-CS

24 packs

1/8" X 25 ft CableRail Conceal Kit**

CRC 1/8 : 125-PKG

1/pack

CRC 1/8 : 125-CS

12 packs

1/8" X 30 ft CableRail Conceal Kit**

CRC 1/8 : 130-PKG

1/PKG

CRC 1/8 : 130-CS

12 packs

1/8" X 40 ft CableRail Conceal Kit**

CRC 1/8 : 135-PKG

1/pack

CRC 1/8 : 135-CS

12 packs

1/8" X 50 ft CableRail Conceal Kit**

CRC 1/8 : 140-PKG

1/pack

CRC 1/8 : 140-CS

12 packs

1/8" X 40 ft CableRail Conceal Kit**

CRC 1/8 : 145-PKG

1/pack

CRC 1/8 : 145-CS

12 packs

Conceal Additional Items & Tools

Item Name/Description

Unit Item #

Case Item#

Qty/Unit

Qty/Case

End Caps (for Conceal Kits only) Conceal End Cap Black**

701

1/ea

Conceal End Cap White**

702

1/ea

Conceal End Cap Brown**

703

1/ea

Conceal End Cap Gray**

704

1/ea

Conceal End Cap Silver**

705

1/ea

Conceal End Cap Taupe**

706

1/ea

Conceal End Cap Bronze**

707

1/ea

Conceal End Cap Green**

708

1/ea

Conceal End Cap Cream**

709

1/ea

Tools (for Conceal Kits only) Conceal Tool Kit** : Conceal Star Driver, 2 Ratcheting Box Wrenches, T-Handle Hex Wrench

CRC-KIT

1/pack

CableRail Universal Tools & Additional Items

Item Name/Description

Unit Item #

Case Item#

Qty/Unit

Qty/Case

Additional Components for ALL CableRail solutions Protector Sleeve SS (1/8-3/16) - wood/composite only Tools & Maintenance for ALL CableRail solutions Cutter Wire Rope Max 1/8 (7-1/2")

3210-PKG

10/pack

3210-CS

24 packs

2972-PKG

1/pack

2972-CS

6 packs

Quick-Connect ® Release Tool SS (1/8”)

3128-PKG

1/pack

3128-CS

24 packs

Cable Lacing Needle (1/8")

3221-PKG

1/pack

3221-CS

12 packs

Feeney Steel Renewal / Steel Protect

5064-PKG

1/pack

5064-CS

6 packs

Professional Tension Gauge

6004-PKG

1/pack

© 2025 Feeney, Inc. Consistent with our policy of continuing product improvement, we reserve the right to change product specifications without notice or obligation. v2/25 See page 18 for Intermediate Pickets.

CableRail Product List - Fittings + Bulk Cable

Item Name/Description

Unit Item #

Case Item#

Qty/Unit

Qty/Case

1/8" CableRail Fittings 1/8" Quick-Connect ® Surface Mount

9903W-PKG

1/pack

9903W-CS

20 packs

1/8" Quick-Connect ® Threaded Terminal

9904-PKG

1/pack

9904-CS

20 packs

1/8" Quick-Connect ® Lag

9905DL-PKG

1/pack

9905DL-CS

20 packs

1/8" Quick-Connect ® Lag Tensioner

9910DL-PKG

1/pack

9910DL-CS

20 packs

1/8" Quick-Connect ® Surface Mount Tensioner

9913W-PKG

1/pack

9913W-CS

20 packs

1/8" Quick-Connect ® Pivot

9915DL-PKG

1/pack

9915DL-CS

20 packs

1/8" Quick-Connect ® Pivot Tensioner

9916DL-PKG

1/pack

9916DL-CS

20 packs

1/8” Quick-Connect ® Inset

3146W-PKG

1/pack

3146W-CS

24 packs

Quick-Connect ® Protection Seal

9917-PKG

20/pack

9917W-CS

10 packs

Bulk Cable 100’ Reel of 1/8" 1x19 T316

5100

100-ft/box

N/A

250' Reel of 1/8" 1x19 T316

5250

250-ft/reel

N/A

500' Reel of 1/8" 1x19 T316

5500

500-ft/reel

N/A

Fittings + Bulk Cable Tools

Item Name/Description

Unit Item #

Case Item#

Qty/Unit

Qty/Case

Tools for Fittings + Bulk Cable Hanger Bolt Installation Tool - Lag/Pivot Fittings only

3988-PKG

1/pack

3988-CS

20 packs

Quick-Connect ® Wrench Wheel - Lag/Pivot Fittings only

6006-PKG

1/pack

6006-CS

10 packs

CableRail Universal Tools & Additional Items

Item Name/Description

Unit Item #

Case Item#

Qty/Unit

Qty/Case

Tools & Maintenance for ALL CableRail Solutions Cutter Wire Rope Max 1/8 (7-1/2")

2972-PKG

1/pack

2972-CS

6 packs

Quick-Connect ® Release Tool SS (1/8”)

3128-PKG

1/pack

3128-CS

24 packs

Cable Lacing Needle (1/8")

3221-PKG

1/pack

3221-CS

12 packs

Feeney Steel Renewal / Steel Protect

5064-PKG

1/pack

5064-CS

6 packs

Professional Tension Gauge

6004-PKG

1/pack

Additional Components for ALL CableRail solutions Protector Sleeve SS (1/8-3/16) - for wood/composite only

3210-PKG

10/pack

3210-CS

24 packs

See page 18 for Intermediate Pickets.

CableRail Tools & Intermediate Pickets

CableRail Tools

Item Name/Description

Unit Item #

Case Item#

Qty/Unit

Qty/Case

Tools & Maintenance Cutter Wire Rope Max 1/8 (7-1/2")

2972-PKG

1/pack

2972-CS

6 packs

Quick-Connect ® Release Tool SS (1/8”)

3128-PKG

1/pack

3128-CS

24 packs

Cable Lacing Needle (1/8")

3221-PKG

1/pack

3221-CS

12 packs

Feeney Steel Renewal / Steel Protect

5064-PKG

1/pack

5064-CS

6 packs

Professional Tension Gauge

6004-PKG

1/pack

Tensioning Tool w/ 1/8" Attachment - Std CR Kits only

6005-PKG

1/pack

6005-CS

4 packs

Conceal Tool Kit: Star Driver, 2 Ratcheting Box Wrenches, T-Handle Hex Wrench - Conceal only

CRC-KIT

1/pack

N/A

Hanger Bolt Installation Tool - Lag/Pivot Fittings only

3988-PKG

1/pack

3988-CS

20 packs

Quick-Connect ® Wrench Wheel - Fittings only

6006-PKG

1/pack

6006-CS

10 packs

Intermediate Pickets

Item Name/Description

Unit Item #

Case Item#

Qty/Unit

Qty/Case

Aluminum Intermediate Pickets (includes Base Plates for LEVEL and STAIR, plus hardware for LEVEL wood frame) Universal Picket (44") Black - wood/composite only CRPK : 7648 BLK-PKG 1/ pack CRPK : 7648 BLK-CS

10 packs

Universal Picket (44") Silver - wood/composite only

CRPK : 7648 SLV-PKG 1/ pack

CRPK : 7648 SLV-CS

10 packs

Universal Picket (44") White - wood/composite only CRPK : 7648 WHT-PKG 1/ pack

CRPK : 7648 WHT-CS CRPK : 7649 BLK-CS CRPK : 7649 SLV-CS CRPK : 7649 WHT-CS

10 packs 10 packs 10 packs 10 packs

Universal Picket (46") Black - wood/composite only Universal Picket (46") Silver - wood/composite only Universal Picket (46") White - wood/composite only Stainless Steel Intermediate Pickets for Wood Frame SS Intermediate Picket for 36" LEVEL - wood only SS Intermediate Picket for 42" LEVEL - wood only

CRPK : 7649 BLK-PKG 1/ pack CRPK : 7649 SLV-PKG 1/ pack CRPK : 7649 WHT-PKG 1/ pack

SSPK : 36L-PKG SSPK : 42L-PKG SSPK : STR-PKG

1/ pack 1/ pack 1/ pack

SSPK : 36L-CS SSPK : 42L-CS SSPK : STR-CS

10 packs 10 packs 10/pkgs

SS Intermediate Picket for STAIR - wood only

CableRail Frequently Asked Questions Are there any specific requirements to consider when designing my railing frame for use with Feeney CableRail infill? Properly installed cables will have a tension load of at least 300lbs per cable, so it’s important that your frame is designed and built strong enough to support these loads. Frames can also be designed to use cables more efficiently, thereby reducing the total quantity of cables needed and the overall cost. In most cases, just adding some simple reinforcing features and design changes will do the trick. For basic guidelines to help you prepare your railing frame, see the Feeney CableRail Installation Instructions and Frame Requirements. How far apart can I space the cables? The International Building Code states that a 4-in sphere cannot pass through any opening in your railing, and since cable is non-rigid, the flex of the cable must be taken into account. Therefore, we recommend spacing the cables no more than 3-in apart in order allow for possible cable deflection and meet the intent of the code. Before starting a CableRail project, the installer should always check with their local building department to see if there are any special local requirements for using and installing cable railings. How far apart can I space my posts? We recommend having a post or vertical member (intermediate picket) at least every 3-ft. With the posts/verticals spaced 3-ft apart and the cables spaced 3-in apart, you should be able to tension the cables so that they won’t open past the 4-in sphere code requirement when a reasonable force is applied. Why would I consider using intermediate pickets on my railing frame? Intermediate pickets (also referred to as vertical spacers) are used as a frame design option to replace some of the larger, bulkier intermediate posts in order to achieve a more open railing design. They are non-structural members and are only intended to maintain cable spacing and minimize possible cable deflection. Intermediate pickets are typically made from 1 x 2-in or 2 x 2-in wood strips, 1-in copper water tubing, or 1/4-in thick metal flat bar, but other slender materials may be used as well. You may also use one of our pre-drilled Feeney Intermediate Pickets. What’s the longest cable run I can have? Straight runs of cable (no corners or bends) should not exceed 70-ft. Runs with corner bends (using double corner posts) should not exceed 40-ft and should not have more than two corners per run. What tools are needed to install Feeney CableRail? The beauty of the CableRail Kits is that you don’t need special crimpers or tensioning tools. The basic tool list would include safety glasses, work gloves, tape measure, pencil, electric drill & bits, hammer, 7/16-in wrench, locking pliers, hacksaw, cable lacing needle, cable cutters or electric grinder with cutoff disk. We also recommend using the Feeney Tension Gauge to measure final cable tension. What happens if I need to remove the Quick-Connect ® fitting from the cable? Should this occur, use our Quick-Connect ® Release Tool (sold separately) to unlock the jaws on the Quick-Connect ® fitting.

Why would I need to use a Cable Lacing Needle? The cable is made up of 19 individual wires that are twisted together. Sometimes, these individual wires can splay open and snag when lacing the cable ends through the post holes. The reusable Cable Lacing Needle slides onto the end of the cable and keeps all of the wires contained within the needle allowing you to quickly guide the cable through the holes without snagging. Can you pass the Cable Lacing Needle through the Quick-Connect ® fitting? No! The diameter of the Cable Lacing Needle is too large and will become wedged in the QuickConnect ® fitting, rendering the fitting useless. Be sure to remove the Cable Lacing Needle and cleanly trim the end of the cable before inserting the bare cable into the Quick-Connect® fitting. What is Feeney CableRail made of? All CableRail cables and fittings are made from high quality 316-grade stainless steel (also referred to as “marine grade”). This high quality stainless steel offers beauty, superior weather durability, high strength, and low maintenance characteristics that far exceed other traditional railing infill materials. What will I need to maintain Feeney CableRail cables? CableRail cables and fittings are made from high quality 316-grade stainless steel and are low maintenance, but do require maintenance periodically. Wipe the cables with soap and warm water and use either a rag or non-abrasive synthetic pad to keep them clean and free of salt or other contaminates. We also recommend use of our Feeney SteelProtect™ protectant product on a regular basis to leave a protective layer that can help maintain the performance and luster of our cables and fittings. While rare, corrosion or staining may sometimes occur on stainless steel due to airborne contaminants, humidity, and other factors, especially in coastal environments. Our biodegradable SteelRenewal™ cleaning gel can be used to effectively remove rust, staining, and other contaminants without scrubbing. Simply apply, allow it to sit, and then rinse it off. Be sure to also check the cables periodically for proper tension (re-tension as necessary). Is there any additional maintenance required for harsh environments? For CableRail installations with harsher conditions, such as coastal environments, we recommend cleaning your cables and applying our Feeney SteelProtect™ protectant product regularly. Please see the information above to learn more about cable maintenance, including re-tensioning the cables and recommended use of our SteelProtect™ and SteelRenewal™ cleaner and protectant products. Do the cables need to be attached with fittings at every post? No. The cables are laced freely through holes in the intermediate posts and are then tensioned with end fittings that attach to only the termination posts. Can I attach the cables directly to the face of a wall or post? The cable fittings used with CableRail Kits are attached by drilling holes all the way through the end posts, and the fittings then bear up against the outside faces of the posts. If your railing frame runs into the face of a wall, you will need to install an end post no more than four inches away from the wall face to allow access for attaching the cable end fittings. There are also other types of CableRail fittings that are designed for particular attachment conditions, such as wall mounting, and you can ask your authorized Feeney CableRail dealer for details. Can I run the cables continuously around a single corner post or do I have to terminate? For wood and composite sleeved posts, you will need to terminate the cables at a single corner post. In order to run the cables continuously around a corner, you would need to have double posts at the corner. For basic guidelines to help prepare your railing frame, please see our CableRail Installation Instructions. © 2025 Feeney, Inc. Consistent with our policy of continuing product improvement, we reserve the right to change product specifications without notice or obligation. v2/25

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 76 Page 77 Page 78 Page 79 Page 80 Page 81 Page 82 Page 83 Page 84 Page 85 Page 86 Page 87 Page 88 Page 89 Page 90 Page 91 Page 92 Page 93 Page 94 Page 95 Page 96 Page 97 Page 98 Page 99 Page 100 Page 101 Page 102 Page 103 Page 104